2811路由器来完成，本实验分两种方法来做，各有特点。
先看下路由器的flash:
yourname#dir
Directory of flash:/
1 -rw- 25438028 Oct 22 2010 02:25:58 +00:00 c2800nm-ipbase-mz.124-15.T.bin
2 -rw- 1505280 Oct 22 2010 02:26:08 +00:00 common.tar
3 -rw- 931840 Oct 22 2010 02:26:16 +00:00 es.tar
4 -rw- 1038 Oct 22 2010 02:26:20 +00:00 home.shtml
5 -rw- 112640 Oct 22 2010 02:26:26 +00:00 home.tar
6 -rw- 415956 Oct 22 2010 02:26:34 +00:00 sslclient-win-1.1.4.176.pkg
7 -rw- 2748 Oct 22 2010 02:26:38 +00:00 sdmconfig-2811.cfg
8 -rw- 35316 Apr 5 2011 06:09:42 +00:00 crashinfo_20110405-060943
9 -rw- 42068 Apr 5 2011 06:30:26 +00:00 crashinfo_20110405-063027
128733184 bytes total (100229120 bytes free)
以下是实验过程
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
access-list 102 permit ip any 192.168.1.0 0.0.0.255
第二步：定义class-map ,调用第一步的ACL
class-map match-all 102
match access-group 102
第三步：定义policy-map，调用class-map，做速率限制
policy-map 102
class 102
police 256000 8000 conform-action transmit exceed-action drop
第四步：把policy-map应用到接口上
interface FastEthernet0/1
service-policy input 102
service-policy output 102
*Apr 5 06:24:04.023: %IP_VFR-4-FRAG_TABLE_OVERFLOW: FastEthernet0/1: the fragment table has reached its maximum threshold 16
FastEthernet0/1
Service-policy input: 102
Class-map: 102 (match-all)
2746 packets, 672324 bytes
5 minute offered rate 20000 bps, drop rate 0 bps
Match: access-group 102
police:
cir 256000 bps, bc 8000 bytes
conformed 2746 packets, 672324 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 90000 bps, exceed 0 bps
Class-map: class-default (match-any)
13407 packets, 1753107 bytes
5 minute offered rate 49000 bps, drop rate 0 bps
Match: any
Service-policy output: 102
Class-map: 102 (match-all)
3506 packets, 2954143 bytes
5 minute offered rate 68000 bps, drop rate 44000 bps
Match: access-group 102
police:
cir 256000 bps, bc 8000 bytes
conformed 2243 packets, 1195420 bytes; actions:
transmit
exceeded 1263 packets, 1758723 bytes; actions:
drop
